CondenSAFE
The unit is divided in three sections and the media is contained in bags that you can replace easily when needed. We have replaced the date label with a 12-month time indicator that needs to be activated. It monitors elapsed time and indicates when key time markers and a pre-defined elapsed time have been reached.
As the unit is divided in three sections, you can place one, two, or three bags in the unit, depending on the volume of condensate that needs to be treated. Use only the sections you need!
Advantages
- Wall brackets are included to fix the unit to the wall
- Engineered media is contained in a replaceable bag
- No disconnection required to replace media
- Time indicator (12 months) included
- No by-pass needed
- Economical and environment friendly
- Can be connected to hard piped
- Long-life heavy duty tank and cover
- Use only the sections you need
Features
Description
Model | Width In/Cm | Length In/Cm | Height In/Cm | Inlet / Outlet* | Provided with |
---|---|---|---|---|---|
CS6 | 12/30,5 | 4¾/12 | 5½/14 | ½’’ FNPT | One media bag including 12-month time indicator, wall brackets, two 1/2'' x 3/4'' barbed fittings, and two glued ½’’ x ¾’’ female fittings |
The inlet of the unit is located slightly lower than the outlet. You'll need to install the filters in alternance before using it.
Treatment capacity
Model | MBH | kWh | gal/h | L/h | Unit Max condensate flowrate* |
---|---|---|---|---|---|
1 section | 525 | 154 | 2.1 | 8 | 6.3 GPH (24 LPH) |
2 sections | 1050 | 308 | 4.2 | 16 | 6.3 GPH (24 LPH) |
3 sections | 1575 | 461 | 6.3 | 24 | 6.3 GPH (24 LPH) |
Contact local authorities to verify the regulation regarding the authorized acidity level of effluent (drain or septic tank). Also confirm the condensate output with your heating unit supplier. In general, 500,000 BTU/hr at 92% efficiency should generate around 1.6 gal/hr.